Issue #1: November, 2005 Bookmark this page
  Introducing AutoFocus ? The Automotive Sealing eNewsletter from Viton®

Welcome to the first issue of AutoFocus, the eNewsletter that delivers the latest sealing news, views and expert opinions on Viton® fluoroelastomer sealing technology from DuPont Performance Elastomers.

Each issue will give you 'hot-off-the-press' news of Viton® ? a leading specialty fluoroelastomer ? with details of new products and new technologies to help you meet the toughest operating environments and emissions regulations in fuel system, drivetrain and engine sealing. Issue #1 focuses on low emissions and emissions reduction.

  

 
  Introducing DuPont Performance Elastomers - Delivering performance when it matters.
On June 30, 2005, DuPont Dow Elastomers, the joint venture between DuPont and The Dow Chemical Company, became a wholly owned subsidiary of DuPont, called DuPont Performance Elastomers.  Read Full Story
 
    Cars: Number 1 in HC Emission
Understanding US and EU Emissions Regulation Programs  Read Full Story
 
  Meeting LEV II, PZEV and Euro 4 with Viton® fluoroelastomers
Parallel with the introduction of tough new LEV II, PZEV and Euro 4 auto emissions regulations, DuPont Performance Elastomers (formerly DuPont Dow) has commercialized the next generation of regulation-compliant fluoroelastomers ? Viton® made with Advanced Polymer Architecture (APA).  Read Full Story
 
  Air intake seals from ITW Southland meet LEV II
Increasingly stringent regulations are pushing automotive evaporative emission limits beyond the capabilities of many sealing materials. Consequently, fuel system and engine sealing OEMs have been searching for next generation materials with fuel permeation performance to meet LEV II and PZEV regulations and Euro 4 requirements.  Read Full Story
 
  Fluoroelastomers for Extrusion of High Quality Tubing and Thin Walled Fuel Line Hose Veneers
DuPont Performance Elastomers has recently developed new polymerisation technology to produce fluoroelastomers designed for extruded automotive components such as thin walled fuel line hose veneer.  Read Full Story
 
    Global testing labs help you meet auto emissions regulations
If you specify materials for critical automotive O-rings, tubing, hose and gaskets, you need assurance that permeation levels will fall within US and EU automotive evaporative hydrocarbon emissions regulations.  Read Full Story


Trademarks, Terms of Service


Click below to sign up for future updates.




DuPont Performance Elastomers Homepage
AutoFocus is published 3 to 4 times annually by DuPont Performance Elastomers. Hypalon®, Kalrez® and Viton® are registered trademarks of DuPont Performance Elastomers. Vamac® is a registered trademark of the DuPont Company and brought to market by DuPont Performance Elastomers.
Trademarks, Terms of Service